September 2016



North America News

After receiving a petition, the Consumer Product Safety Commission (CPSC) published a notice on September 1, 2016 in the Federal Register to request comments on amending the Statement of Interpretation and Enforcement Policy regarding the labeling of household products containing methylene chloride. Currently, the policy statement provides guidance and sets forth general principles and examples for labeling to warn consumers of the potential cancer hazard resulting from certain household products, including paint strippers and adhesive removers, which contain methylene chloride. However, it does not address any acute hazard posed by inhalation of methylene chloride vapor. Therefore, the petitioner, Halogenated Solvents Industry Alliance, Inc., asked the CPSC to expand the policy statement to address the need for an acute hazard warning label on household products containing methylene chloride that are readily available for consumers to purchase and use.

The comment period concerning the petition is open until October 31, 2016.

On September 28, 2016, the Consumer Product Safety Commission (CPSC) Final Rule 81 FR 17062 will enter into force. The rule amended 16 CFR 1112 and 1233 by providing an applicable safety standard for portable hook-on chairs, ASTM F1235-15. The standard ASTM F1235-15 defines portable hook-on chairs as usually a legless seat constructed to locate the occupant at a table in such a position and elevation so that the surface of the table can be used as the feeding surface for the occupant (supported solely by the table on which it is mounted).

The standard includes performance requirements and test methods designed to ensure the satisfactory performance, and hence, minimize injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of portable hook-on chairs.

On October 2, 2016, the Consumer Product Safety Commission (CPSC) Direct Final Rule 81 FR 37128 will enter into force. The rule will revise 16 CFR 1227 to adopt an updated applicable standard for carriages and strollers, ASTM F833-15. In the direct final rule, a new version of the standard, ASTM F833-15 Standard Consumer Safety Performance Specification for Carriages and Strollers, will be adopted and replace the current 2013b version. The key changes in the new standard are summarized in our test.

Below is a summary of recently updated ASTM standards that may be of interest to our clients:

CPSIA / CFR Reference

ASTM Standard No.

Detail

-

ASTM F1004-16b

Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures

Covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and expandable enclosures.

-

ASTM F2601-16a

Standard Specification for Fire Safety for Candle Accessories

Prescribes the performance requirements and corresponding test procedures for candle accessories to help ensure a reasonable degree of personal safety during normal use, thereby, reducing incidences of fires, deaths, and injuries.

16 CFR 1234 (Proposed)

ASTM F2670-16a

Standard Consumer Safety Specification for Infant Bath Tubs

Establishes performance requirements, test methods, and labeling requirements to promote the safe use of infant bath tubs. Specifically excluded from the scope of this standard are products commonly known as bath slings, typically made of fabric or mesh.

In August 2016, a new version of ASTM F2601-16a Standard Specification for Fire Safety for Candle Accessories was published. Changes have been made to definitions, safety and performance requirements and procedures.

Key changes of ASTM F2601-16a are summarized below:

  1. Definitions of the following terms are updated:

    1. "Candle burner" is now defined as a candle holder that restricts the free flow of exiting combustion gases, including, but not limited to, lanterns, potpourri burners and food warmers.

    2. "Shade" is newly added and is defined as a candle accessory placed above the candle, whose function is to modify light from the flame and change the appearance of the candle.

    3. "Topper" is newly added and is defined as a vented candle accessory, which is placed directly on top of a container candle, to modify airflow.

  2. There are additional requirements that apply to all types of burners designed to use a candle as a source of heat or light, or both. Candles accessories marketed as food warmers must be assessed to determine whether the item qualifies as a candle burner, a candle holder or other type of accessory and evaluated accordingly. Candle burners and potpourri burners are also subject to the requirements. Updated requirements include:

    1. A new warning label is required for all candle burners which have the capability of accepting multiple types of candles, For example: "WARNING: For use with

      one, single wick container candle (Quantity, size, number of wicks and type of candle) up to 22 ounces."

    2. If the appropriate candle in burner is a tealight, it must meet the requirements of fire safety. If the unit can be used with multiple candles, the unit is to be tested with the largest candle and the maximum number of candles specified on the label of the burner.

    3. The new determination method requires exactly three identical candle burner samples to be tested. Each of them must be tested for at least 8 candle burn cycles. If candle reaches end of life before the 8th cycle, the test will be continued with a new candle until 8 cycles are completed.

    4. For burner that requires tea light or candle that reach end of life within 4 hours, each candle burned to the end of life is considered a complete cycle. Thus, eight complete cycles are required.

    5. Any candle burner shall be tested to the manufacturer’s specified instructions for use.

In 1986, California voters approved an initiative titled California Proposition 65 to address their growing concerns about exposure to toxic chemicals. Since its origin, there have been many lawsuits that have resulted in reformulations of consumer products containing carcinogenic and reproductively harmful chemicals on the Cal Prop 65 list. 60-day notices from July and August of 2016 include the following:

Chemical

Product / Source

Number of Notices

Acrylamide

Fried or Baked Sweet Potato Based Snack Foods

2

Arsenic (inorganic arsenic compounds), Arsenic (inorganic oxides), Lead

Clay Powder

2

Cadmium

Necklaces

1

Caccao Powder / Nibs

7

Antacid Tablets

12

Carbon monoxide, Soots, tars, and mineral oils

Fire Pit

1

Di(2-ethylhexyl)phthalate (DEHP)

Throttle Control

1

Wheelchair Cushion

2

Bedding Protector

1

Medical Bedside Mat

1

Tweezer Case

1

Jewelry Boxes

1

Fitness balls

1

Rain boots

1

Shower tubing

1

Fishing System

1

Audio Cable

1

PVC Rain Suit

2

Training Gloves

1

Camp Sink and Worktop

1

Suction Catheter Trays with Chimney Valve

1

Clutch

1

Windshield Visor

1

Shower Cap

1

Sink Stopper

1

Vinyl/PVC Syringes

1

Vinyl/PVC Table Tennis Paddle Hand Grips

1

Vinyl/PVC Helmet Pumps

1

Clothesline Wires

1

Solar Panels with Vinyl/PVC Wires

1

Grooming Products with Polymer Covers

1

Children's Footwear

1

Turkey and roast lifters with polymer handles

1

Suit storage bags

1

Photo Albums

1

Di(2-ethylhexyl)phthalate (DEHP), Di-isodecyl phthalate (DIDP), Diisononyl phthalate (DINP)

Hose

3

Vinyl/PVC Dustpan Grips, Tongs with Vinyl/PVC Handles/Grips, Vinyl Covers, Vinyl Flatware Carriers, Squeegees with Vinyl/PVC Blades, Vinyl/PVC Washer Bases (Suction Cups used in Sink), Vinyl/PVC Tethers, Vehicle Brushes with vinyl/PVC Bumpers

1

Di(2-ethylhexyl)phthalate (DEHP), Di-isodecyl phthalate (DIDP), Di-n-butyl phthalate (DBP), Diisononyl phthalate (DINP)

Hose

1

Di(2-ethylhexyl)phthalate (DEHP), Diisononyl phthalate (DINP)

Headphones

1

Hose

3

Sport Bag with Snorkel Gear

1

Di(2-ethylhexyl)phthalate, Di-isodecyl phthalate (DIDP), Diisononyl phthalate (DINP)

Vinyl/PVC Dustpan Grips, Tongs with Vinyl/PVC Handles/Grips, Vinyl Covers, Squeegees with Vinyl/PVC Blades, Vinyl/PVC Washer Bases (Suction Cups used in Sink), Vinyl/PVC Tethers, Vehicle Brushes with vinyl/PVC Bumpers

1

Di-isodecyl phthalate (DIDP)

Vinyl Pillow

1

Diisononyl phthalate (DINP)

Bolster Roll

1

Medical Inflatable Vinyl Invalid Ring

1

Cando Foam Wedge

1

Plastic liners

1

Fishing Lures

1

Gloves

2

Shower Cap

2

Di-n-butyl phthalate (DBP)

Sandals

2

Exercise Balls

2

Ethylene Glycol

Anti-freeze/Coolant

1

Lead

Adapters

2

Air Chucks

1

Connectors

3

Air Line Oilers

1

Mortise Cylinders

1

Valves

5

Wall Flanges

2

Brass Stems

2

Goji Berries

2

Shot Glasses

1

Shock Absorbers

1

Air Regulators

1

Toilet Tank Ball Guides

1

Ballcocks

1

Brass Fittings

2

Washer Gutter Cleaners

1

Washer Gutter Cleaners

1

Plug Head

1

Mugs with Vinyl/PVC Sleeves / Exterior Designs

2

Wood dust

Pine Bedding

1

Pine Animal Bedding

1

On August 30, 2016, the Office of Environmental Health Hazard Assessment (OEHHA) adopted the amendments to Article 6 of California Code of Regulations (CCR), Clear and Reasonable Warnings. The amendments will be enforceable on August 30, 2018 and businesses may comply with the provisions of the amended regulation during the two-year transition period.

The amendments repeal all of the current regulatory provisions of title 27 of the CCR except those added via emergency rulemaking in April 2016, which related to warning for exposures to bisphenol A in canned foods and beverages.

Key changes to the regulation are summarized below:

  1. New definitions for terms are provided, for example:

    1. Consumer product means any article, or component part thereof, including food that is produced, distributed or sold for the personal use, consumption or enjoyment of a consumer.

    2. Consumer information includes warnings, direction for use, ingredient lists, and nutritional information. It does not include the brand name, product name, company name, location of manufacture or product advertising.

  2. The amended regulation will no longer require a person to provide separate warnings to each exposed individual.

  3. New regulations outline clearly and separately for:

    1. The methods of transmission of each type of warning, and

    2. The content requirements of each type of warning

  4. New types of warnings are added to the regulations, for examples (in related to consumer product):

    1. Raw wood product exposure warnings

    2. Furniture product exposure warnings

In general for the consumer product exposure warning, following elements are required:

  1. A symbol consisting of a black exclamation point in a yellow equilateral triangle with a bold black outline (on the left of word "WARNING")

  2. The word "WARNING" in all capital letters and bold print followed by warning detail according to the type of risk, for example:

    1. "This product can expose you to chemicals including [name of one or more chemicals], which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.", or

    2. "This product can expose you to chemicals including [name of one or more chemicals], which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov."

On July 29, 2016, the Office of Environmental Health Hazard Assessment (OEHHA) issued a notice to propose an amendment to the California Code of Regulation (CCR) regarding the Proposition 65 warning requirements for bisphenol A (BPA). The proposed amendment is undergoing the regular rulemaking procedure and a comment period is now open until September 26, 2016. On April 18, 2016, OEHHA implemented an emergency regulation regarding labeling requirements for BPA for canned and bottled foods and beverages to allow temporary use of a standard point-of-sale warning messages (See test). However, the regulation was only valid for 180 days. Thus, OEHHA proposed an amendment to the CCR in a regular rule making process to continue the use of this standard point-of-sale warning with a sunset date of December 30, 2017.

On September 9, 2016, the Office of Environmental Health Hazard Assessment (OEHHA) issued a notice to announce that five proposed chemicals or chemical groups will be discussed at the meeting of the Proposition 65 Carcinogen Identification Committee (CIC).

The CIC is a group of expert scientists appointed by the Governor to identify chemicals that have been clearly shown though scientifically valid testing according to generally accepted principles to cause cancer. The CIC will provide the OEHHA with advice on the prioritization of following chemicals or chemical groups:

  1. Aspartame

  2. Asphalt and Asphalt Emissions Associated with Road Paving and Asphalt and Asphalt Emissions Associated with Roofing

  3. Methyl Chloride

  4. Type I Pyrethroids

  5. Vinyl Acetate

A 45-day public comment period is open until October 24, 2016 and will be followed by a meeting on November 15, 2016. At the meeting, no listing decisions will be made for the above chemicals. The OEHHA will select chemicals for preparation of hazard identification materials in consideration for listing the chemicals under California Proposition 65 and announce those decisions in a separate notice at a later date.

In the US, when hazards are identified in consumer products, they will be recalled and published in the Consumer Product Safety Commission (CPSC) Recent Recalls on the CPSC Website, which is updated daily. The US recalls from July 1 to August 30, 2016 are summarized below:

Hazard

Frequency

Fire Hazard

16

Fall Hazard

8

Burn Hazard

7

Laceration Hazard

4

Other Hazards*

21

* Other Hazards include Burn Hazard, Choking Hazard, Crash Hazard, Electric Shock Hazard, Impact Hazard & Laceration Hazard with frequency less than 4.

Product Categories

Frequency

Sporting Goods / Equipment

17

Home Electrical Appliances (Hair dryer, iron, etc.)

5

Furniture

4

Other Categories^

23

^ Other categories include Computer / Audio / Video / Other Electronics & Accessories, Consumer Chemicals, Fabric / Textile / Garment / Home Textile, Food Contact Material, Homeware (non-food contact), Jewelry, Juvenile Product, Lighting, Watch or other Fashion Accessories, Tools & Hardware, Toys and Childcare Articles with frequency less than 4.

Download the complete Recalls Summary - US (Last Update Date: August 30, 2016).

In Canada, when hazards are identified in consumer products, they will be recalled and published in the Recalls and Safety Alerts Database on the Health Canada Website, which is updated daily. The Canada recalls from July 1 to August 30, 2016 are summarized below:

Hazard

Frequency

Choking Hazard

6

Fall Hazard

5

Burn Hazard

5

Laceration Hazard

4

Other Hazards

14

* Other Hazards include Chemical Hazard (combination of methylisothiazolinone and methylchloroisothiazolinone (MI/MCI)), Electric Shock Hazard, Entrapment Hazard, Fire Hazard, Impact Hazard, Injury Hazard, Violation of Child-Resistant Closure Requirement, Violation of Flammability Requirements, Violation of Lead Standard & Violation of Packaging and Labeling Requirements with frequency less than 3.

Product Categories

Frequency

Toys and Childcare Articles

5

Fabric / Textile / Garment / Home Textile

5

Food Contact Material

3

Furniture

3

Jewelry, Watch or other Fashion Accessories

3

Sporting Goods / Equipment

3

Other Categories^

18

^ Other categories include Computer / audio / video / other electronics & accessories, Consumer Chemicals, Cosmetics / Bodycare, Home Electrical Appliances (Hair dryer, iron, etc.), Homeware (non-food contact), Juvenile Product, Lighting, Tools and Hardware less than 3.

Download the complete Recalls Summary - Canada (Last Update Date: August 30, 2016)

South America News

On July 29, 2016, the Senate of Colombia proposed bill PL-2016-N033C, which establishes lead limits in various products. The bill sets requirements for products that may contain lead to prevent citizens, especially children, from lead poisoning.

The proposed bill prohibits the manufacturing, importing or distributing of products, including toys, clothing, accessories, jewelry, decorative objects, edible products, sweets, food, furniture and dietary supplements, that contain:

  1. Any accessible part handled by children with a lead content greater than 90 ppm (0.009%), or

  2. Any articles with a lead content greater than 1000 ppm (0.1%)

In addition to the above products,

  1. Paintings for decorative use at home or work shall not contain more than 90 ppm (0.009%) of lead.

  2. In water distribution systems for human, animal or irrigation that are composed of more than 1% metal, the metal components shall not contain greater than 2000 ppm (0.2%) lead if components contact water.

Europe News

On July 7, 2016, the European Commission (EC) issued and implemented a list of new harmonized standards. The list of standards shows presumption of conformity to the Directive 2014/35/EU Low Voltage (LVD), which has been effective since April 20, 2016. After a 2-year transition period, the new LVD replaced Directive 2006/95/EC on April 20, 2016. A list of standards was published that shows presumption of conformity to the new directive. In the list, there are more than one hundred standards, some of which cover common appliances as noted below:

  1. EN 60335-2-25:2012 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

  2. EN 60335-2-29:2004 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

  3. EN 60335-2-90:2006 Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens

  4. EN 61558-2-7:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys

  5. EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories

  6. EN 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified)

  7. EN 62477-1:2012 Safety requirements for power electronic converter systems and equipment - Part 1: General

  8. EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications

  9. EN 62868:2015 Organic light emitting diode (OLED) panels for general lighting - Safety requirements

On August 18, 2016, the European Commission (EC) informed the World Trade Organization (WTO) that a draft directive amending the Toys Safety Directive 2009/48/EC was published. The draft directive proposes amendment regarding the migration limits of lead for toys or components.

Upon enforcement, the limit of lead will be amended as noted below:

Limit of Lead (mg/kg)

Category 1

Dry, brittle, powder-like or pliable toy material

Category 2

Liquid or sticky toy material

Category 3

Scraped-off toy material

Current limit

13.5

3.4

160

Amended limit

2.0

0.5

23

The proposed lead limits are identical to those in the past-proposed amendment from September 25, 2014. However, the date entering into force is now postponed to the 3rd quarter of 2018 instead of the 1st quarter of 2017.

On August 25, 2016, Commission Regulation (EU) 2016/1416 was approved and published in the Official Journal of the European Union (EU). The newly approved regulation amends and corrects the current Food Contact Material (FCM) Regulation (EU) No. 10/2011. The amendment will update specific migration limits (SML), definitions and testing conditions. On September 14, 2017, following key amendments will be effective:

1. Currently, the term "hot-fill" is used in the context of setting restrictions on the use of certain materials and articles intended to act as a receptacle for hot food. In order to clarify the scope, a new definition is added for "hot-fill", which means the filling of any article with a food with a temperature not exceeding 100oC at the moment of filling, after which the food cools down to 50 oC or below within 60 minutes, or to 30oC or below within 150 minutes. Therefore, if the material or article is intended to be employed only for hot-fill conditions, only a 2-hour test at 70°C shall be carried out.

2. The specific migration testing condition is updated to include new selection of test temperature:

Worst foreseeable contact temperature

Contact temperature to be selected for testing

175°C < T ≤ 200°C

200°C

T > 200°C

225°C

3. Food simulant D2 is updated as follows:

Food Simulant D2 (Before)

Food Simulant D2 (After)

Vegetable oil

Any vegetable oil containing less than 1% unsaponifiable matter

In addition, effective September 14, 2018, the Specific Migration Limit (SML) for Zinc and Aluminum will be updated as summarized below:

Element

SML (Before)/ mg/kg

SML (After)/ mg/kg

Barium

1

1

Cobalt

0.05

0.05

Copper

5

5

Iron

48

48

Lithium

0.6

0.6

Manganese

0.6

0.6

Zinc

25

5

Aluminum

-

1

Asia News

In June 2016, the Minister of Environment and Water Resources in Singapore approved the amendment act S 263/2016. The amendment act revises the current Environmental Protection and Management Act to include new chemical requirements, which are similar to the European restriction of the use of certain hazardous substances (RoHS) in controlled electrical and electronic equipment (EEE).

Compared to EU RoHS, Singapore RoHS applies to a narrower group of EEE products that are designed for household use, as listed below:

  1. Air-conditioner

  2. Flat panel display television

  3. Mobile phone

  4. Phablet

  5. Portable computer

  6. Refrigerator

  7. Washing machine

The restricted chemicals (Limits) set forth in the amendment act are summarized below:

  • Cadmium and its compounds (0.01%)

  • Hexavalent chromium (0.1%)

  • Lead and its compounds (0.1%)

  • Mercury and its compounds (0.1%)

  • Polybrominated biphenyls (0.1%)

  • Polybrominated diphenyl ethers (0.1%)

The implementation date of the Singapore RoHS is July 1, 2017.

On October 1, 2016, the Notice to amend the Toys and Children’s Products Safety Ordinance enters into force. The notice will amend certain safety standards for children’s products including toys.

In general, the amended ordinance will adopt an updated version of standards (See test) for the following products:

  1. Toys

  2. Babies dummies

  3. Carry cots and stands

  4. Children’s high chairs and multi-purpose high chairs for domestic use

  5. Children’s paints

On October 18, 2016, Thailand notification No. 374, which was published in April 2016, will enter into force. The notification includes the newly required food nutrition labeling information, Guideline Daily Amounts (GDA). The GDA label provides energy value information and the amount of sugar, fat and sodium in the product. Apart from the content information requirement, the notification also provides the format requirements for the GDA label (See test).

On September 22, 2016, a total of 127 standards which were announced through Notice 08/2015 from the National Health and Family Planning Commission of the People’s Republic of China (NHFPC) entered into force.

The standards provide requirements and applicable testing methods for foods, food additives, food contact materials and nipples (See test), such as:

  1. GB 1886-2015 National Food Safety Standard - Food Additives (Part 1 to Part 168)

  2. GB 4806.2-2015 National Food Safety Standard - Nipples

  3. GB 31604.1-2015 National Food Safety Standard - General Rules for Migration Test of Food Contact Materials and Articles

On June 30, 2016, the Philippines House of Representatives proposed house bill No. 321, an Act regulating the Importation, Manufacture, Distribution and Sale of Children’s Toys, School Supplies, Childcare articles and Other Related Products Containing Hazardous Chemicals.

Compared to the US Consumer Product Safety Improvement Act (CPSIA), the definitions of "Childcare article", "Toy", "School Implement" and "School Supplies" are different (see below).

Product

US CPSIA

Philippines proposed Bill no. 321

Childcare Article

A consumer product designed or intended by the manufacturer to facilitate sleep or the feeding of children age 3 years and younger, or to help such children with sucking or teething.

Any product intended to facilitate sleep, relaxation, hygiene, the feeding of children or sucking on the part of children (under 14 years of age).

Children's Toy

Consumer product designed or intended by the manufacturer for a child 12 years of age or younger for use by the child when the child plays.

Any product or material designed and clearly intended for use in play by children under 14 years of age.

School Implement

NA

A tool used by children for writing, drawing, coloring, marking, gluing, or erasing that is likely to be licked or put in the mouth.

School Supplies

NA

Items or articles used for educational purposes which are not likely to be put in the mouth of children.

Within three months from the effective date of this Act, the Philippine Food and Drug Administration (FDA) shall prepare a list of prohibited chemicals and substances, which may cause harm, injury, or death to children. In the list, following chemicals shall also be included:

Item

Chemicals

Testing Methods

1

Toxic Metals:

Antimony

Arsenic

Cadmium

Chromium

Lead

Mercury

For heavy metals identified in PNS/ISO 8124-3, compliance with one of the following standards is required:

ISO 8124-3, or

EN-71-3, or

ASTM F963

2

Phthalates:

Di-(2-ethylhexyl) phthalate (DEHP)

Dibutyl phthalate (DBP)

Benzyl butyl phthalate (BBP)

Diisononyl phthalate (DINP)

Diisodecyl phthalate (DIDP)

Di-n-octyl phthalate (DnOP)

For phthalates, compliance with one of the following is required:

US Section 108 of Consumer Products Safety Improvement Act (CPSIA), or

Entry 52 of Annex XVII of Europe REACH Regulation 1907/2006

3

Bisphenol A (BPA)

Not Specified

On August 2, 2016, the Philippines House of Representatives proposed house bill No. 2349, an Act Providing for Toy and Game Safety Labeling. The proposed bill provides standardized safety warning labeling and instruction requirements for toys. In the proposed bill, any toys or games containing the following components shall bear a suitable warning on the packaging:

  1. Small part intended for use by children less than 14 years of age

  2. Any marble intended for use by children less than 14 years of age

  3. Any latex balloon or any ball with diameter of 1.75 inches or less intended for use by children less than 10 years of age

The cautionary statement in the warning label shall be written in English. Filipino or both languages. Below warnings are examples:

Australia/New Zealand News

Am 30. August 2016 veröffentlichte die australische Wettbewerbs- und Verbraucherkommission (Australian Competition & Consumer Commission, ACCC) eine Bekanntmachung, in der sie mitteilte, dass das Bundesgericht den Online-Händler Ozsal zur Zahlung von Strafgeldern in Höhe von insgesamt 500 000 US-Dollar verurteilt hat, weil er entflammbare Kindernachtwäsche geliefert hatte, die nicht der in Australien vorgeschriebenen Sicherheitsnorm AS/NZS 1249:2003 entsprach. Die nicht konformen Produkte wurden außerdem zurückgerufen. Die nicht konformen Produkte wurden zurückgerufen, weil Kinder schwere Verbrennungen erleiden können, wenn Nachtwäsche leicht und schnell Feuer fängt. Die stellvertretende Vorsitzende des ACCC, Delia Rickard, erklärte daher, dass alle Einzelhändler, die Kleidungsstücke verkaufen, die unter eine australische Sicherheitsnorm fallen, überprüfen müssen, ob ihre Produkte der Norm entsprechen.

Die verbindliche australische Norm AS/NZS 1249:2003 regelt die Sicherheitsprüfung und die Kennzeichnung der Entflammbarkeit von Kindernachtwäsche. Für einige Kleidungsstücke schreibt die Norm die Masse bestimmter Stoffe vor. Bei Kleidungsstücken aus bestimmten Materialien wie Baumwolle gilt: Je dichter das Material ist, desto schneller brennt es.

In der Norm wird auch die maximal zulässige Länge von Verkleidungen und Befestigungen festgelegt. Lange Borten oder Befestigungen erhöhen das Risiko, dass ein Kleidungsstück einer Wärmequelle ausgesetzt wird, selbst wenn Eltern oder Betreuer glauben, dass ein Kind sich in ausreichendem Abstand zur Wärmequelle befindet.

Abonnieren Sie unsere regulatorischen Updates

Sie können sich jederzeit abmelden. Lesen Sie unsere Datenschutzrichtlinie.